Dead Mule Recoil Reducer
Mechanical (no mercury) recoil reducer. 4-1/4″Lx7/8″ diameter. Weighs 7 oz. Stock model is made to be inserted into the stock bolt hole and still allow the use of the stock wrench. Fits Perazzi, Beretta, Krieghoff (some modification required), Winchester 101, Beretta 301, 302 or 303, and other stocks with 7/8″ or larger stock bolt holes. Small stock bolt holes need enlarging. Beretta 303 Auto Model screws on in place of the forend nut.
Counter Coil
Unlike other recoil reducers, the Counter Coil is a true adjustable hydraulic shock absorbing unit. The hydraulic cylinder compresses, absorbing the shock of recoil and decelerates the rearward thrust of the firearm. What this means to the shooter is less recoil is felt. The cylinder is single acting, which means the shooter can adjust the compression stroke for a 12 gauge shotgun or a .458 Winchester magnum, and their return rate is unaffected. With the wrench provided, the adjustments can be made in the field in less than 10 seconds. Adjustments are made by turning the cylinder rod with your fingers. There are 3-5 revolutions of adjustments available. When the unit is adjusted to the most comfortable setting, further adjustments are not necessary.
GraCoil
The GraCoil is a compression butt plate with an adjustable tension setting and adjustable pad plate, made to fit any shooter’s style. Tension will adjust from 14 lb. to 70 lb. with a maximum stroke of 5/16″, producing a response time hardly detected, and no distractions between shots. The pad plate adjust up or down and side to side with plenty of adjustment for comfort. Moving parts slide on Teflon liners for a smooth and trouble free motion. Very little lubrication or maintenance is required.
The GraCoil adds 1″ to the stock length, and requires the stock to be shortened in most cases. All aluminum and stainless steel construction. Comes complete with screws and wrenches.